#ADVANTAGES OF ROUTER ON A STICK DOWNLOAD#

Switch (config-if) # switchport mode trunk Switch (config) # interface fastEthernet 0/1 In our Router on Stick topology, Trunk interface will pass all our VLANs that we allowed. We will connect switch to the router, with this interface. It is time to configure the switchвЂ™s router face interface, interface 0/1. Interface Fa0/1 is not on the VLAN table. LetвЂ™s verify the VLANs.ДЎ default active Fa0/8, Fa0/9, Fa0/10, Fa0/11ДЄN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2ДЄs you can see, for our Router on Stick topology, Interface Fa0/2 and Fa0/3 are the member of VLAN 2, Interface Fa0/4 and Fa0/5 are the member of VLAN 3, Interface Fa0/6 and Fa0/7 are the member of VLAN 4. Our VLAN configurations are OK on the switch now. Switch (config-if-range) # switchport access vlan 4 Switch (config) # interface range fastEthernet 0/6-7 Switch (config-if-range) # switchport access vlan 3 Switch (config) # interface range fastEthernet 0/4-5 Switch (config-if-range) # switchport access vlan 2 Switch (config-if-range) # switchport mode access Switch (config) # interface range fastEthernet 0/2-3 Lastly, we will assign the interface to a specific VLAN with вЂњ switchport access vlanвЂќ command. Then, we will enter the interface range and configure the interface range as access interface. Now, letвЂ™s configure our VLANs and assign the interfaces to these VLANs.

In this article, we will use the below Router on Stick topology and we will configure Inter VLAN Routing on Packet Tracer.

#ADVANTAGES OF ROUTER ON A STICK DOWNLOAD#

You can download вЂњCisco Packet TracerвЂќ in Tools section. pkt format in Packet Tracer Labs section. You can also DOWNLOAD all the Packet Tracer examples with. You can DOWNLOAD the Packet Tracer example with. We will learn Routing on Stick Topology and Router on Stick Config on this lesson. Inter VLAN Routing topology or Router on Stick topology is a very common topology for CCNA exams. In other words, this topology called вЂњ Router on StickвЂќ topology. To enable the communication of these different sub networks, we need Inter VLAN Routing. So at the beginning, there is no communication between VLAN. We have discussed the basic logic of VLANs in the previous articles.As you know each VLAN is a seperate VLAN. Many companies use to divide their networks into different departments. VLANs are the virtual LANS that provide divide your big network, into smaller pieces. Router on Stick Configuration on Packet Tracer

IP Configurations For Inter VLAN Routing.

Router on Stick Configuration on Packet Tracer.

Advantages of router on a stick